Home » Shutter » Indoor door cover need to be moistureproof processing before installation

Indoor door cover need to be moistureproof processing before installation

Indoor door cover before installation to moistureproof processing, create greater efficiency, remind here, such as excessive damp or long-term ground water, Poly Shutters ventilation condition of bad environment, such as bathroom, kitchen, the ground floor, basement, new build by laying bricks or stones openings, etc.), please be sure to when installed on the back of the door and the site of contact with the ground do moistureproof processing, and the specific moistureproof processing methods recommended as follows: method 1: before you install with sealing tape sealing the door parts back,China Poly Shutters and saw after installation components to the ground, after the installation, use the glass glue sealing the door between the ground and ground cracks;Method 2: like the operation method and process, the use of spray or brush moistureproof paint instead of using the sealing glue, with glass glue seal between the door and the ground finally ground crack;Method three: with the sealing glue or moistureproof paint seal first saw after parts of the ground, and then the door cover the frame (side ting, gear head) to adjust fixed, Poly Shutters Wholesale using polyurethane foam filling the gaps between the door cover and the hole in the wall, with glass glue sealing finally ground crack.

Comments are closed.