Home » Shutters Hardware » What is door window sealing what to use have

What is door window sealing what to use have

[ChinaGoodWood.com] when it comes to door and window sealing, many people do not understand, but it is widely used in the home doors and Windows, if the door and window sealing quality is poor, it is likely to affect the door and window closure, resulting in the wind and water, the replacement is also very troublesome.Stay tuned for more information if you want to learn more.Door and window rubber seal strip is mainly used in plastic steel doors and Windows, aluminum alloy doors and Windows, wood doors and Windows and other architectural decoration doors and Windows.Plastic steel doors and Windows seals on the market are generally made of PVC, modified PVC, epdm, elastomer seal strips Shutters Hardware, silicone and other materials.One, the use of doors and Windows seal doors and Windows seal in use is divided into three categories of glass seal strip (rubber strip), door leaf cover seal strip and wool strip, glass seal strip is used for sealing between glass and fan and frame, door leaf cover seal strip is mainly used for sealing between door plate and frame, wool strip is mainly used for sealing between frame and fan.In the production and installation of plastic steel doors and Windows, broken bridge aluminum doors and Windows, wooden doors, sealing strip is an essential accessory.Two, the effect that door window seals sealant strip is in window of window of model steel door and window of door of door of aluminium of broken bridge and wood door and window rose waterproof, sealing the main effect that reachs energy-saving, sound insulation, dustproof, frost proof, heat preservation.It must have strong tensile strength, good elasticity, but also a good temperature resistance and aging resistance.In order to ensure the fastening of the rubber strip and profile, the sectional structure size of the rubber strip must match the profile of the plastic steel doors and Windows.Sealing tape is commonly used in flat doors and Windows, hanging Windows, folding doors and Windows.The main function is insect – proof,Shutters Hardware Wholesale water – proof, sound – proof, sealing and so on.The installation part of the wool strip is generally on the sliding window (door) fan, around the frame fan or on the sealing bridge (wind block) to enhance the sealing between the frame and the fan.Wool piece specification is the main factor that affects sliding door window and watertight performance, also be the main factor that affects door window switch force.Wool piece specification is too big or vertical wool is exorbitant, not only assemble difficulty, and make door window mobile resistance increases, especially the initial resistance when open and the resistance when closing final emplacement are bigger.Specification is too small, or verticalwool height is insufficient, easy come out groove outside, make the sealing performance of door window reduces greatly.1. Carefully remove sundries in the groove before installing the glass, such as mortar, brick, wood blocks, etc., and carefully center the glass to ensure uniform clearance on both sides, and fix it in time to prevent collision and shift and deviation from the center of the groove.2. The rubber seal strip shall not be pulled too tight, and the blanking length shall be 20-30mm longer than the assembly length.When installing, should enchase reach the designated position,Shutters Hardware Factory the surface is smooth, close contact with vitreous, vitreous notch, make vitreous circumjacent force is even.The rubber strip at the corner should be beveled to disconnect and glued firmly at the disconnect.3. When sealing the glass with sealant, squeeze the glass with rubber strip or rubber block to leave a gap for glue injection. The depth of glue injection should be no less than 5mm.Although door window sealing is inconspicuous, but also very important.When consumer is choose and buy, had better choose and buy brand product, also more reliable on quality.

Comments are closed.